M32C M16C UART Monitor Program

M32C M16C UART Monitor Program

• After the Monitor Program is written to the MCU and the Monitor Program communicates with the Debugger, the user program can be debugged. Use RS-232C for communication between the Debugger and the Monitor Program.
• When debugging with the Debugger, write the Monitor Program to the MCU using a flash programmer (ex. M16C Flash Starter).

Target Devices

The debugger depends on your MCU. In addition, the High-performance Embedded Workshop version of the debugger is the successor debugger of the KD30/KD3083 version. The High-performance Embedded Workshop version is only scheduled for release in the future.

M16C R8C FoUSB/UART debugger (High-performance Embedded Workshop Version) or
M16C R8C FoUSB/UART debugger  (KD30 Version)

Family	Series	Group	Part No.
M16C	M16C/60	M16C/62A	M30624FGAFP/GP	M30625FGAGP
		M16C/62M	M30624FGMFP/GP	M30625FGMGP

M32C FoUSB/UART debugger (High-performance Embedded Workshop Version) or
M32C FoUSB/UART debugger(KD3083 Version)

Family	Series	Group	Part No.
M16C	M32C/80	M32C/83	M3033FJFP/GP	M30835FJGP

 

M32C UART debugger(KD308 Version)

Family	Series	Group	Part No.
M16C	M16C/80	M16C/80	M30800FCFP/GP	M30802FCGP

System Configuration

Preparations

• PC with Serial Port
• Communication Cable
• Target Board, Power Supply
• Flash Programmer (for writing the monitor program to the MCU)
• Monitor Program
• Debugger

* You can download the Monitor Programs and the Debuggers from "Downloads" button.

Operating Environment

The operating environment depends on your debugger.

M16C R8C FoUSB/UART debugger (High-performance Embedded Workshop Version),
M32C FoUSB/UART debugger (High-performance Embedded Workshop Version)

PC	IBM PC/AT or compatible PC with Intel Pentium III 600MHz or higher
OS	Windows XP, Windows 2000, Windows ME, Windows 98 SE (98)
Memory	128MB or higher
Interface	9-pin D-SUB Serial Interface

M16C R8C FoUSB/UART debugger (KD30 Version),
M32C UART debugger (KD308 Version),
M32C FoUSB/UART debugger (KD3083 Version)

PC	IBM PC/AT or compatible PC with Intel DX4 100MHz/Pentium II 75MHz or higher
OS	Windows XP, Windows 2000, Windows ME, Windows 98 SE (98), Windows 95
Memory	16MB or higher
Interface	9-pin D-SUB Serial Interface